Glass Care

Most household glass cleaners contain soaps, scents, or dyes, and those additives stay on the glass after the liquid evaporates. That residue attracts dust and holds moisture, which is why haze returns within days. Our automotive glass cleaner is built to lift contamination and evaporate completely, leaving nothing behind.

Glare usually comes from a residue that is too thin to see in the daylight. Headlights and streetlights hit that film at a low angle and scatter across it, causing starbursts and halos in poor conditions. A cleaner that leaves nothing behind removes the problem at the source. Invisible Glass has been tested by independent laboratories and proven to be 100 percent residue-free, which is why glare improves noticeably after a proper cleaning.

Work out of direct sunlight, as the sun dries the cleaner before you can wipe it, leaving streaks every time. Use a clean microfiber cloth rather than paper towels, which shed lint and push residue around. Spray the glass, wipe to lift the grime, then dry completely with a second dry microfiber towel. Roll each window down an inch so you can reach the top edge where film collects. The same method gives you streak-free results on mirrors and every other glass surface on the vehicle. For full step-by-step instructions, check out our guide on How to Clean Car Windows Streak-Free.

Yes, as long as the cleaner is ammonia-free, because ammonia is the ingredient that damages tint film. Invisible Glass is ammonia-free, which makes it safe on both factory and aftermarket tint. The formula also has no high pH levels or silicone wetting agents that could haze the film or affect clarity, so the tint looks the same after cleaning as it did before.

Regular glass cleaner will not touch mineral deposits or bonded film, since those need something stronger than a surface clean. Our Glass Stripper Kit removes silicone, wax, oils, tar, tree sap, road salt, and hard water spots from auto glass, and it restores the glass before you apply a rain repellent or ceramic coating.